Cloud EVO

 VapeXhale Cloud EVO – Vape Vitals
Manufacturer VapeXhale
Style Desktop
Method Convection
Warranty 1 Year (Unit)
3 Years (Electronics)
Replacement Parts Coming Soon
MSRP $450.00

VapeXhale Cloud EVO

Brief Overview

The VapeXhale Cloud EVO Vaporizer (EVO) is a premium desktop vaporizer with industry-first features. The Cloud EVO Vaporizer utilizes a unique heating element that never touches your blends, and adds an all-glass airway. The Cloud EVO featuers a 18mm ground glass fitting on the top, so in addition to the included dry glass mouthpiece, you can use any 18mm ground glass attachment that makes sense.

See User Guides below for full usage information.

Using Your Cloud EVO

A: Cloud EVO has made a handy guide for full operation, but its as simple as loading EZ Load Chamber (ELB), inserting it to the pre-heated VapeXhale, and drawing!

Check the ‘User Guide’ tab on the left for full instructions.

A: The Cloud EVO excels with a medium-fine to fine grind. Larger grinds or an inconsistent grind level will effect preformance negatively.

Note that chunkier pieces may need to be broken up when stirring to create more surface area, thus creating a denser vapor.

A fine grind will also work, but can clog up the screen if it is too fine; it will also require lower temperature settings due to the lower airflow that is a direct result of the more densely loaded particles. If the particles are finer than the holes in the screen, then they are definitely too small.

A: Regardless of the temperature you set, the Cloud EVO should be ready within two minutes, with lower temperatures often sooner. There’s an internal LED that illuminates the internal glass. Red indicates that the Cloud EVO is heating, while a green light will indicate the Cloud EVO has reached your set temperature.
A: The Cloud EVO offers a very wide range of temperatures, from gentle heat upwards to temperatures that could overheat your blends. This gives you many temperature options so that you may create exactly the vapor quality you want!
A: Yes. Simply remember where the indicator was from your last session, and you will know exactly where to set it each time. When first using the Cloud EVO always start with low temperatures, and work your way up until you find your personal sweet spot.
A: VapeXhale has created a PerpetuaHeat System (PHS) on the EVO that can alter the temperature of the core heater as you draw. VapeXhale realized that everyone draws at a different rate, and created a vape that can deliver a huge range of temperatures. So why is there even a temperature adjustment knob if the PHS system is engaged and adjusting to you? People have drastically different draw rates, so the temperature adjustment allows you find the right ‘zone’ for your rate. The knob gets it close, the PHS gets it closer.

  • Turn the unit on and turn the knob 1/3 of its possible rotation, and allow to preheat for 90 seconds. The key is to start low and go up incrementally.
  • Load your blends into the (ELB), and insert it into the EVO.
  • Draw at a comfortable rate, and check for any visible vapors being created.
  • If you see vapors at this point, you have lucked into the correct setting for your draw rate.
  • If you don’t see any vapors, turn the knob SLIGHTLY, wait 30 seconds for the temperatures to adjust and try to draw again. Repeat this process until you have vapors forming.
A: We recommend always turning the power off to the Cloud EVO when not in use.
A: Yes. Each blend, personal draw rate and environment is different, and since the heater is capable of higher than normal temperatures for a vaporizer, it’s vital when you first receive the EVO that you always start with low temperatures and work your way up. Starting low is the key to finding vapor perfection with the Cloud EVO.
A: The Cloud EVO has a range from roughly 150°F to ~650°F
A: The Cloud EVO was designed to be able to vaporize both blends and concentrates. Included with your Cloud EVO from VapeWorld are two VapeXnails, which allow you to insert concentrates in place of blends.
A: VapeWorld only carries 110v units.  For 220V, Please contact Cloud EVO directly.  
A: Don’t fill the ELB’s too tightly, or the airflow will be restricted; this makes drawing difficult and creates a situation where your blends could potentially over-heat.

The VapeXhale’s temperature is controlled by two things: the temperature setting of course, but also the rate at which a user draws from the unit. The Cloud EVO is capable of a lot of heat, and also a lot of air flow.

So – at any given set temperature – drawing slower will create higher temps, while drawing faster will allow for ‘cooler’ temps (relative to drawing slowly). This is a direct result of how long air is allowed to be near the heater. The slower you draw, the longer it has to heat up, and the faster you draw, the less time it spends getting warm.

A: Yes! The Cloud EVO Vaporizers are customizable. The 18mm ground glass fitting allows you to use any ground glass attachment you wish. Use caution if you are using a water device. Leaky glass and the Cloud EVO (or any other electronic device) don’t mix well.
A: Yes. VapeXhale Cloud EVO’s are made in Philadelphia. The glass is handmade in California.
A: The Cloud EVO is made from the highest quality materials:

  • Heater=Glass encapsulated heater
  • Glass=Borosilicate
  • Housing=High-Impact Plastic
A: The VapeXhale’s element is a glass encapsulated heater. It surrounds the glass pathway, but does not make contact with it.
A: Start with moderately filled, and add a little more if you wish, just don’t overload or the airflow will be restricted, and your experience will be diminished.
A:The Cloud EVO uses a unique screen which also acts as the heating chamber.

Cleaning & Maintenance

A: Always unplug the vaporizer from the electrical outlet and allow to cool COMPLETELY before cleaning, 30 minutes should be sufficient.

Always make sure your vaporizer is COMPLETELY dry before plugging it back in.

Do not attempt any internal or external repairs to your unit as doing so may cause fatal injury – or worse – void your warranty! (Please contact us if you feel something is wrong with your vaporizer.)

The Cloud EVO is an extremely durable vaporizer that will require minimal cleaning and maintenance.

The exterior can be kept clean with a warm damp cloth. If any of the glass parts require cleaning, place in a small isopropyl alcohol bath until residue has dissolved. Small brushes might aid this removal. The screen can be soaked in isopropyl alcohol.

A: Over time your glass will become dirty.  Soaking in isopropyl alcohol or running glass parts through a dishwasher would be acceptable methods of cleaning.  
A: Inspect your vaporizer periodically. Look inside the glass airpath, check your screen, wand and hose for any buildup that could be effecting performance. It will tell you when it needs cleaning.
A: Isopropyl alcohol is an excellent cleaner for your glass parts and screen, but we don’t recommend using it on the finish; instead use a warm damp cloth on the exterior.
A: The glass and the screen will collect the majority of the build-up.

Ordering – Returns – Warranty

A: Cloud EVO offers a standard 3 year warranty on all of its electronics. This warranty is upgrade-able. Contact VapeXhale for more information on extending your warranty. 
A: VapeXhale handles all warranty requests. Full information available on the warranty tab to the left.
A: Glass is not covered under the three year warranty, however if you Cloud EVO arrived with broken glass, that is warrantied but only for the first 30 days of ownership.
A: Yes. Contact VapeXhale for more information on extending or upgrading your warranty. 
A: Please contact VapeXhale. They are handling all warranty requests. Full contact information is available on the Warranty tab
A: Your proof of purchase from VapeWorld should be sufficient. Please contact us if you have any questions.

If you have any other questions about the Cloud EVO vaporizer, please Contact us! 

Get to know the Cloud EVO Vaporizer

Coming Soon

Product Dimensions 8.25in x 3.25in x 3.5in (20.95cm x 8.25cm x 8.89cm)
Package Dimensions 9in x 6in x 3.5in (22.86cm x 15.24cm x 8.89cm)
Product Weight .68lbs (.31kg)
Package Weight 1.46lbs (.66kg)
Power Source 110v
Heating Element Encapsulated Glass
Vapor Path Glass
Warm-Up Time ~120 Seconds
Vapor Delivery Method Direct Draw/Glass Stem
Country of Manufacture USA
Warranty 1 Year (Unit, Extendable)

Included with Purchase:

  • 110v Cloud EVO Vaporizer
  • 2 EZ Load Chambers (ELB)
  • Power Cord
  • 2 VapeXnails
  • Glass Stem (Dry)
  • Neoprene Sleeve
  • User Guide

Cloud EVO User Guide



Getting the Most Out of Your VapeXhale

  • ALways start on lower temperatures, and work your way up until you find your personal sweet spot.
    • The PerpetuaHeat System heater will adapt to your draw rate, but it takes a second or two to adjust.
    • On the flip side, if you slow your draw rate, it will create a high heat enviroment until the PHS system adjusts.
  • Stirring should not be necessary. The ELB provides even vaporization, and will be too hot too touch.
  • Grind consistency – are the ground-up particles all roughly the same size?
  • Grind level – the Cloud EVO prefers a medium grind, but experiment with finer or coarser grinds to see if it achieves the result you are after.
  • Amount used – Some vaporizers thrive when loaded fully. Others, not so much.
  • Draw rate – Convection vaporizers with good airflow can have their temperatures altered by the speed at which you draw a breath. As the air passes over the heating element, obviously it heats up. If you draw fast, causing the air to move quickly over the heating element, it only has “X” amount of time to heat up. However if you draw slowly, the air has much more time to heat up, and therefore will deliver a much warmer air to your blends. Drawing fast = cooler temps; drawing slow = warmer temps.


The Cloud EVO is thoughtfully designed, part of which is being able to be cleaned easily.

  • The Cloud EVO itself can be cleaned with a damp (not moist or wet!) cloth, and stubborn stains can be removed with a mild detergent, being careful to test an inconspicuous spot underneath the vaporizer beforehand.
  • Want to clean just the screen? It may become clogged with buildup before the entire wand needs cleaning. To clean just the screen, soak in Isopropyl alcohol.
  • The glass can be cleaned with Isopropyl alcohol; simply soak, shake, and rinse. Allow to dry fully before use.

Need Assistance with your VapeXhale?

Try these Solutions to common issues:

A: You either a) the temperature too high, or B) are drawing too slowly. Adjust the temperature knob until you are no longer overheating your blends.
A: Make sure the unit is on, and the temperature is set high enough to vaporize the particular blend you are using. Check the light near the power cord, it gets brighter the more you turn the knob. If you are still not getting vapors, continue until the knob is at its maximum.

If you still do not have any vapors, please Contact us.

If these troubleshooting tips don’t work, please Contact us.

Coming soon.

Cloud EVO 3 Year Warranty

Cloud EVO handles all warranty concerns for Cloud EVO Vaporizers:


If you need more information about VapeXhale’s Warranty, please contact us

Leave a Reply