300 – Vape Vitals
Manufacturer QuickDraw
Tank Style Various
Method Direct Draw
Threading None
Battery Style Li-Ion 650mAh
Warranty 1 year
Replacement Tanks Yes
MSRP $100


Brief Overview

With the ability to instantly recognize material, unmatched performance, and cutting-edge design, QuickDraw® devices precision heat three material types for the optimal delivery of rich, flavorful vapor.

See User Guides below for full usage information.

Using Your 300

A: As with most pen vaporizers, the 300 is super easy to use. Refer to the full instructions located on the ‘User Guide’ tab, but here is a quick rundown on using the 300:

Charge the 300 – This could take over an hour the first time, but subsequent charges should not take longer than 45-60 minutes.

Load the 300 – Choose the proper cartridge for your material. The tanks are magnetic and slide into the unit.

Liquids – Unscrew mouthpiece from cartridge body and fill chamber with liquid, below overflow line. While filling, hold cartridge at an angle to prevent liquid from entering central vapor path. Reattach mouthpiece and slide cartridge into vaporizer chassis .

Blends – Remove mouthpiece from cartridge body. Place shredded dry herb loosely in chamber below white chamber wall. Replace mouthpiece and slide cartridge into vaporizer chassis.

Concentrate – Unscrew mouthpiece from cartridge body, then place wax in chamber, below overflow line. Reattach mouthpiece and slide cartridge into vaporizer chassis.

Power up and draw – If the switch on the 300 is locked, unlock by pressing the button three times. This enables the power switch and the 300 is ready to use. Press the button to begin vaporization. Use until you have had your fill, or the 30-second shut off turns the atomizer off.

A: The 300 heats up instantly. With a powerful 650mAh Li-Ion battery, the 300 heats up fast.
A: There are no temperature settings on the 300. It goes from room temperature to its peak temperature in just one second.
A: First and foremost its vital that you use the cleanest and purest liquids and concentrates you can find. The 300 was designed for use with liquids that vaporize cleanly and leave no particulate behind. For the blend cartridge, try altering your draw rate to create different levels of vapor.

Since the 300 has only one temperature setting, its essentially foolproof. Press the button, and use until you have your fill or until the 300 shuts off automatically after 30 seconds.

A: The 300 was designed for blends, liquids, and concentrates.

Do not put aromatic blends or solid concentrates that melt into the wrong atomizers included with the the 300. Always check to make sure you are using the correct cartridge.

A: The AC adapter is rated from 100v to 240v. You might need an adapter for your location outside of North America. There is also an USB-only option, and can be used anywhere in the world.
A: The atomizer coils is nickel/aluminum-alloy(liquids/concentrates), Stainless steel(blends) The main body is Aluminum.
A: The 300 has a nickel/aluminum-alloy atomizer(liquids/concentrates) and stainless steel(blends).
A: Liquids and concentrates love high temperatures, so you should not have an overheating issue! Blends need a specific heat. The blend cartridge will be recognized instantly by the 300 was programmed to deliver exactly the temperature you need.
A: The liquid and concentrate versions have an overfill line. Do not fill the blend cartridge past the stainless steel inner.
A: Yes, after 30 seconds of use, the 300 will power off.

There is also a safety on the power switch, clicking it three times turns off the power button, and repeating this turns the button back on. This is great if you have the 300 in your purse, or pocket, as it prevents it from going off accidentally and wasting your battery or worse.

As a general safety rule, do not leave the 300 unattended while powered on.

A: The cartridges easily slide out from the chassis and can be replaced as needed.
A: The blend cartridge has a proprietary screen.
A: The battery is a 650mAh barrel battery. It has no threading and uses magnets to hold the cartridges.
A: The 300 comes with an AC adapter or USB plug. The USB plug can be used by itself in a powered USB port anywhere in the world.
A: When the 300 Battery is in need of a charge, the red ring will flash.

At this time, connect the 300 Battery to the 300 USB Charger. The 300 Wired USB Charger can be connected to either a compatible USB port or USB/AC wall adapter (included).

Once the red LED light turns green, the 300 Battery has been fully charged.

A: According to QuickDraw, allow up to 3-4 hours charging time for the first cycle. Then, it should only take about one hour to charge, depending on your charging source. There is a microchip to protect your battery; when it becomes fully charged, the charging will be cut off.

Cleaning & Maintenance

A: Any liquid that may have spilled out or collected on the body of your 300 can be removed with a warm damp cloth.

Within the atomizer of your 300 tank, the atomizer works to clean itself by burning off any residue that comes in contact with it. We don’t recommend using any type of liquid cleaning agent in the 300 tank, as doing so could cause it to malfunction. If you are having issues with the atomizer, namely a distinct change in aroma, please replace it. Atomizers do not last more than 4-5 weeks with normal use. Your experience will vary.

The mouthpieces can be washed with isopropyl alcohol until the buildup dissolves.

Monitor and replace atomizer as needed. Check your vape each time you use it, it will tell you how often it needs to be cleaned. If you are having issues with the atomizer, namely a distinct change in aroma, please contact us if you need a replacement.
A: Cleaning the atomizer is not recommended, replace as needed.

Make sure you don’t expose the atomizer or battery to any cleaning liquids whatsoever. If you need to clean the outside of the 300, use a warm damp cloth. If the 300 gets wet in any way, allow to dry in the sun or a warm dry area until COMPLETELY DRY. Attempting to use the 300 if wet will cause serious damage to the unit.

A: The atomizer should be replaced as needed on the 300. Over time even the purest liquids will allow buildup to collect on the Atomizer coil; replace as needed.

Ordering – Returns – Warranty

A: One year.
A: Not at this time.

QuickDraw 300 1 Year Warranty

VapeWorld is handling all of the warranty requests and service for the 300.


If you need more information about 300’s Warranty, please contact us

A: Your warranty period begins with your date of purchase. Contact Vape World for more information about warranty registration. If you need proof of purchase information for your Vape World purchased 300, please contact us.

If you have any other questions about the 300 vaporizer, please contact us!

Product Dimensions 6.75in x .6in x .6in (17.1cm x 1.5cm x 1.5cm)
Package Dimensions TBD
Product Weight .11lbs (.05kg)
Package Weight TBD
Vapor Path Steel, Plastic
Tank Capacity 1.6ml
Charging Options USB, 110v/240v(Optional)
Battery Capacity 650mAh
Auto-Off? Yes, 30 second.
Safety Power Switch Yes, 3-Click
Heating Element Nickel/Aluminum-Alloy coil
Warm-Up Time ~1 Seconds
Country of Manufacture China
Warranty 1 Year

Included with Purchase:


  • QuickDraw 300
  • 300-D Cartridge
  • USB Charger

300 DLX

  • QuickDraw 300
  • 300-D Cartridge
  • 300-L Cartridge
  • 300-X Cartridge
  • USB Charger
  • Wall Adapter
  • Cleaning Tools
  • USB Charger

300 User Guides

  • Coming Soon
*Adobe Reader or PDF viewer Required

300 Color Options

QuickDraw 300 Colors

Getting the Most Out of Your 300

  • Never leave a 300 in a hot car. Ever.
  • Allowing the 300 to freeze can damage the atomizer. Avoid temperatures below 40 degrees.
  • Use caution with the included tool, as it could damage the atomizer coil if you aren’t careful.
  • Overloading more than one session’s worth of concentrate is a potential recipe for mess.

300 Maintenance

Cleaning the 300 couldn’t be easier. Use the atomizer until the aroma suddenly changes, then replace or rebuild.

Atomizers will last 4-5 weeks with normal use; your experience will vary.

The inside of the mouthpiece will take on the most buildup, soak it in isopropyl alcohol and clean with a cottonswab if needed.

If any concentrate has made it onto the body of the 300, wipe off with a warm damp cloth.

Need Assistance with your 300?

Try these Solutions to common issues:

A: A few things could be causing this. Is the 5-click safety lock in place? Try clicking your 300 button five times and see if anything happens.

Are you getting any light at all from the button? If not, make sure that its charged properly. This seems obvious, until you realize the power strip you were plugged into wasn’t turned on. Or…the USB port you were plugged into wasn’t actually a powered USB port. Or…there are many reasons to think your vaporizer is charging…when it isn’t. It happens all the time.

If you have charged it fully and unlocked the power button, and are still getting no vapors, remove the mouthpiece, press the button, and see if the atomizer is at least getting warm?

If you have no activity from a fully charged 300, its possible that your atomizer has died. If needed, we have replacement clearomizers available.

A: Make sure your 300 is fully charged, and the atomizer coil is fully seated and loaded properly(not overloaded).
A: The atomizers will last 4-5 weeks with normal use, although your experience will vary. Replace your atomizer when you feel it needs it. A change in aroma will be your first indicator the atomizer has died.

If these troubleshooting tips don’t work, please contact us.

As an authorized dealer of QuickDraw 300 products, we offer a full line of replacement parts and accessories – coming soon!

QuickDraw 300 1 Year Warranty

Vape World is handling all of the warranty requests and service for the 300.


If you need more information about 300’s Warranty, please contact us.

Leave a Reply