|Innokin iTaste MVP 3.0 – Vape Vitals|
|Tank Style||Tank not included|
|Battery Style||Li-Ion 3800mAh|
|Replacement Parts||Coming Soon|
The Innokin iTaste MVP 3.0 is a huge advancement over its predecessor, the MVP 2.0.
Battery life has been increased, short circuit/atomizer protection and sub-ohm options have been added, as well as the standard variable voltage and variable wattage.
Using Your iTaste MVP 3.0
Charge the iTaste MVP 3.0 – THe 3800mAh battery is quite large so this could take a few hours the first time, but subsequent charges should not take longer than 60-90 minutes.
The MVP3.0 battery has a tri-color LED on the top that indicates battery life remaining:
Green = Almost fully Charged. When the iTaste MVP3.0 is fully recharged the top LED light will power off
Yellow = Half Power
Red = Low Power Charge the MVP3.0.
Attach Atomizer The iTaste MVP 3.0 does not include an atomizer tank; you must provide your own. The MVP accepts tanks with 510 threading and also includes an eGo-style adapter.
Power up and draw – Once you have set your preferred wattage and voltage, simply press the power button three times to unlock, then once more to activate the atomizer.
To enter variable voltage(VV) mode, press and hold the Press and hold the “-” button along with the power button for one second to enter variable voltage mode. While in VV mode, press the + or – buttons once and then press again increase or decrease the wattage. MVP can be adjusted from 3.0 to 9.0 watts in .1 volt increments. Press the power button to lock the setting.
The iTaste MVP3.0 features automatic real-time atomizer Ohms detection. If the resistance of the atomizer is lower than 0.4 the Ohms bar will blink and the MVP3 will not power on.
There is also a safety on the power switch, clicking it three times turns off the power button, and repeating this turns the button back on. This is great if you have the iTaste MVP 3.0 in your purse, or pocket, as it prevents it from going off accidentally and wasting your battery or worse.
As a general safety rule, do not leave the iTaste MVP 3.0 unattended while powered on.
At this time, remove the atomizer and connect the iTaste MVP 3.0 Battery to the iTaste MVP 3.0 wired USB charger (at the base of the iTaste MVP 3.0).
Cleaning & Maintenance
The draw stem can be cleaned with the brush, or soaked in isopropyl alcohol until the buildup dissolves.
If you need to clean the outside of the iTaste MVP 3.0, use a warm barely damp cloth. If the iTaste MVP 3.0 gets wet in any way, allow to dry in the sun or a warm dry area until COMPLETELY DRY. Attempting to use the iTaste MVP 3.0 if wet will cause serious damage to the unit.
Ordering – Returns – Warranty
If you have any other questions about the iTaste MVP 3.0 vaporizer, please contact us!
|Product Dimensions||4in x .875in x .875in (10.16cm x 2.2cm x 2.2cm)|
|Package Dimensions||5.5in x 3.25in x 1.25in (14cm x 8.3cm x 3.175cm)|
|Product Weight||.45bs (.2kg)|
|Package Weight||.75lbs (.34kg)|
|Vapor Path||N / A|
|Chamber Material||N / A|
|Battery Capacity||3800 mAh Li-Ion||Voltage||3.0v to 9.0v|
|Auto-Off?||Yes, 15 Seconds|
|Safety Power Switch||Yes, 3-Click|
|Heating Element||N / A|
|Warm-Up Time||~1 Second|
|Country of Manufacture||China|
Included with Purchase:
Innokin iTaste MVP 3.0 30W
USB Charger Cable
- Innokin iTaste MVP 3.0 30W
- USB Charger Cable
- Ego Adapter
- User Manual
MVP 3.0 User Guides
*Adobe Reader or PDF viewer Required
Getting the Most Out of Your iTaste MVP 3.0
- Never leave a iTaste MVP 3.0 in a hot or frozen car, this will deplete the battery life exponentially.
- Allowing the iTaste MVP 3.0 to freeze can damage the atomizer. Avoid temperatures below 40 degrees.
MVP 3.0 Maintenance
If any buildup has made it onto the body of the iTaste MVP 3.0, wipe off with a warm damp cloth.
Need Assistance with your iTaste MVP 3.0?
Try these Solutions to common issues:
Are you getting any light at all from the button or the LED on the top? If not, make sure that the iTaste is charged properly.
If you have charged the iTaste MVP 3.0 fully, unlocked the power button and are still getting no vapors, feel for any warmth at all, and if you feel nothing, please contact us.
If these troubleshooting tips don’t work, please contact us.
MVP 3.0 Accessories coming soon!
Innokin 90 Day Limited Warranty
Innokin is handling all of the warranty requests and service for the MVP.
To be eligible for service under this warranty you MUST return the warranty registration card, the dated receipt or purchase order, or other proof of purchase indicating the date purchased, within three months 90 days of purchasing your genuine Innokin product. Send these items to:
How Do You Get Service? To be eligible for service under this warranty you MUST return the warranty registration card, the dated receipt or purchase order, or other proof of purchase indicating the date purchased, within three months 90 days of purchasing your genuine Innokin product. Send these items to:
After Sales Service Center (California)
17128 Colima Rd #380 Hacienda Heights CA 91745 United States
After Sales Service Center ( North Carolina )
8006 Market St Wilmington, NC 28411
Phone : 910-821-0060
Phone : 1-888-681-9235
E-Mail : Innokinreturns@ElectraVapor.com
We will inspect your device to verify that it is a genuine Innokin product, and if so, repair or replace it if it is received within 90 days of the date of purchase.
*IMPORTANT: WARRANTIES NON-TRANSFERABLE. ITEMS PURCHASED ONLINE FROM E-BAY, AMAZON, CRAIGSLIST, ETC. ARE CONSIDERED 2ND HAND AND WARRANTIES NULL AND VOID!
Any other questions? Let us know.
If you need more information about Innokins’s Warranty, please contact us