Flytlab H2Flo Elite – Vape Vitals
Manufacturer Flytlab
Style Portable
Charging Time ~ 2-3 Hours
Warranty 10 Years
MSRP $220.00

Brief Overview

The advanced Flytlab H2Flo Elite herbal vaporizer uses infused ceramic coil technology that allows your flowers to be heated perfectly in an oven that imparts zero taste. You only taste what you put in the H2Flo Elite and nothing else. Do you prefer water filtration? the H2Flo Elite comes complete with a water filtration unit and an air control unit that allows for unique carburation, and both can use used simultaneously. Want to take the H2Flo Elite on the go? Leave the water and air control units at home and use the H2Flo in its discreet compact form.


A: The H2Flo will flash Red while charging and will turn Green when fully charged.
A: ~ 2-3 hours for a full charge.
A: No it cannot.


A: 365 – 425°F
A: The H2Flo’s temperature can be adjusted by clicking the button 3x to turn it on, and watch the button cycle through the three colors representing the three temperatures. When your favorite temperature color shines, click once more to start up the heating process. If you’re in the middle of the session and want to change temperature, hold the power button and it will cycle through the temperatures. Let go when it’s at your desired color.
Blue – Low Temp; Yellow – Mid Temp; Green – High Temp.


A: Prepare your materials in a medium/fine grind. Pack the oven full and semi tight (so there is still airflow).

Click the button 3x to turn it on, and watch the button cycle through the three colors representing the three temperatures. When your favourite temperature color shines, click once more to start up the heating process.

Take a steady draw and exhale.

*The H2FLO provides 3 different ways to vape:

  • On the go – This method Keeps the H2FLO compact and portable.
    With the mouthpiece directly attached to the H2FLO the user can simply
    inhale the vapors from the oven chamber producing a natural flavor
    and warmer throat hit.
  • Air Chamber – By attaching the Air Chamber you will be able to utilize the ow
    control button that lets air into the chamber when inhaling. It also helps to
    contain the vapors during a full baking session. The windows on the chamber
    allow the user to see the cloud intake during the inhale process. Then you press the carb button to allow more airflow to clear the chamber.
  • Water Chamber – By attaching the Water Chamber it creates a vapor/water
    interaction that both filters and cools down the vapor creating a smoother
    throat hit and a cleaner taste. To fill, unscrew the top piece and fill up to the fill line.
  • A: You will want to stir every few draws to ensure the material is being heated evenly.


    A: The chambers are available on FlytLabs site.

    Common Product Issues

    A: Yes, the H2Flo will turn off after 2 minutes.

    Cleaning & Maintenance

    A: To clean the H2Flo make sure the device is powered off and wait until the oven has cooled. Use the cleaning brush included in the kit to remove any remaining material inside the heating chamber. If there is any residue build up. Use a wipe or alcohol swab to clean it off. It’s important to clean the H2Flo on a regular basis. For the best performance clean the heating chamber after every session.You can use rubbing alcohol to clean the chambers, be sure to rinse clean with water and dry before use!

    Ordering / Returns / Warranty

    A: The H2Flo has a 10 year warranty! Please contact FlytLab with any warranty concerns.
    Charging Options USB / AC Adapter
    Replaceable Battery No
    Recharge Time ~ 2-3 Hours
    Tank Capacity ~ .3 – .4grams
    Tank Material Ceramic
    Warm-Up Time ~ 60 seconds
    Heating Elements Stainless
    Vapor Path Stainless Steel
    Vapor Delivery Method Direct Draw
    Method Convection
    Warranty 10 Years

    Included with Purchase:

    • Rechageable H2FLO
    • Air Chamber w/ Flow Control
    • Water Chamber
    • Black Mouthpiece
    • FLYTLAB Power Plug
    • FLYTLAB Mini USB Wire
    • FLYTLAB Grinder
    • FLYTLAB Tool Set & Spares O-Rings
    • H2FLO Instructional Manual
    • FLYTLAB Sticker

    Flytlab H2FlO Elite

    The H2FlO Elite has an excellent finish available in Black.

    Getting the Most Out of Your Flytlab H2FlO Elite

    • Always allow your H2Flo to fully preheat before use.
    • Do not load your blends too tightly in the stem, this will restrict airflow, H2Flo does not flow freely through the vaporizer, many compare the experience to drinking a shake out of a straw. Don’t try to force it, learn what the H2Flo can provide, and adjust your draw accordingly.
    • Avoid completely depleting the battery before recharging.
    • Do not load your blends to lightly, they may fall out of the stem and make contact with the crucible; this will accelerate your next H2Flo Cleaning.
    • If you aren’t getting exactly the vapor quality you are after, look at adjusting any and/or all of the following variables until you find your sweet spot.

      Grind Consistency – are the ground-up particles all roughly the same size?

      Grind level – the H2Flo prefers a medium to fine grind, but experiment with finer or coarser grinds to see if it achieves the result you are after.

      Amount Used – Some vaporizers thrive when loaded fully. Others, not so much.

      Draw Rate – Convection vaporizers with good airflow can have their temperatures altered by the speed at which you draw a breath. As the air passes over the heating element, obviously it heats up. If you draw fast, causing the air to move quickly over the heating element, it only has “X” amount of time to heat up. However if you draw slowly, the air has much more time to heat up, and therefore will deliver a much warmer air to your blends. Drawing fast = cooler temps; drawing slow = warmer temps.

    • The draw on the H2Flo is not fast. Slow down your own draw until you match that of the H2Flo, this will increase your enjoyment immensely. Slow and steady is the key to H2Flo success.

    Need Assistance with your Flytlab H2FLO Elite?

    Try these Solutions to common issues:

    A: If you feel like you are getting way too much material coming through the mouthpiece holes then first you want to try not pulling as hard. If you still are getting material in your mouth, try grinding your materials a little coarser.
    A: If your H2Flo is not heating and it’s completely charged, please contact our Customer Care department to assistance.
    A: There are many variables at play here. The consistency of the grind of your aromatic blend, the amount of blend in the heating chamber, how evenly the chamber is loaded…A good baseline to start with is the Following:

    A consistent grind (all ground particles are of roughly the same size)

    A medium-level grind, as opposed to a fine grind. Think freshly cracked pepper, vs finely ground pepper. It is recommended to break your blends up by hand. Most grinders will create too fine a grind for the H2Flo.

    A full heating chamber, but not loaded tightly. Don’t fill it past the brim, and then lightly tamp it down to be level.

    Vary your draw rate: it’s possible you are inhaling too hard or too fast. Slow down a bit, and see if the vapor qualities change.

    A full heating chamber, but not loaded tightly.

    Warranty Contact

    Flyt Labs

    FLYTLAB Warranty Policy

    FLYTLAB 10 Year Ltd. Warranty Information
    FLYTLAB, Inc. warrants FLYTLAB against defects in materials and workmanship under normal use for a period of ten (10) years from the date of retail purchase by the original end-user purchaser. If a physical defect arises and a claim is received within the Warranty Period, at its option and to the extent permitted by law, FLYTLAB will either (a.) Repair the product defect, (b.) Exchange the product with a one of the same model or provide a functionally equivalent product if that model is no longer available.
    The Limited Warranty does not apply to normal performance degradation of batteries, Water Chamber, Air Chamber, Cartridges pieces or neglecting to adhere to cleaning instructions. FLYTLAB Warranty is only serviceable in the US & Canada, as FLYTLAB is only available for purchase in the US & Canada at this time.

    Exclusions and Limitations

    The Limited Warranty applies only to products manufactured by FLYTLAB, Inc. that can be identified by the “FLYTLAB” trademark, trade name, or logo affixed to them and purchased at an authorized retailer, serviced by an authorized FLYTLAB distributor.
    The Limited Warranty does not apply to any non-FLYTLAB products.
    This warranty does not apply to (a) damage caused by accident, abuse, misuse, natural disasters, acts of robbery, or other external causes; (b) to damage caused by operating the product outside the permitted or intended use as described by FLYTLAB; (c) to a product or part that has been modified to alter functionality or capability; (d) to cosmetic damage, including but not limited to scratches, dents, and broken plastic.
    Important: Warranty applies to original end-user purchaser only and is non-transferable. Warranty does not apply should you purchase through a 3rd party reseller such as eBay Amazon or Craigslist. FLYTLAB warranties only apply to devices purchased at any authorized retailer serviced by an authorized FLYTLAB distributor. For questions regarding authorized retailers, please contact us via email at support. *Intentionally opening up or disassembling your device in any way will void your warranty.

    Return Policy

    Please carefully research the product you are interested in prior to purchasing. Refunds are only available for new and unused devices purchased on If the box is opened a refund cannot be given. Refunds for devices purchased through an authorized FLYTLAB retailer, must be processed at the place of purchase.

    Claims process:

    To obtain remedies under this Warranty, FLYTLAB must receive Consumer’s claim before the end of the Warranty Period. Consumer must obtain a Return Material Authorization (“RMA”) from FLYTLAB and return the defective Device together with proof of purchase to the address specified by FLYTLAB in connection with the RMA. Consumer shall bear the cost of shipping the Device to FLYTLAB. By sending the Device, Consumer agrees to transfer ownership to FLYTLAB for the purpose of repairing or replacing the unit. FLYTLAB may not return the original Device to Consumer. FLYTLAB warrants that any repaired or replaced Device is covered for the remainder of the original Warranty Period. If the claim is justified based on this Warranty, FLYTLAB shall bear the cost of shipping the repaired or replacement Device to the Consumer. Any product returned to FLYTLAB without a valid warranty claim or without a RMA may be rejected, returned at sender’s cost (subject to prepayment) or disposed of at FLYTLAB’s sole discretion.

    Leave a Reply