Flytlab Lift – Vape Vitals
Manufacturer Flytlab
Style Portable
Charging Time ~ 2 Hours
Warranty 10 Years
MSRP $150.00

Brief Overview

The LIFT by Flytlab, an all new vapor system is the most compact, efficient and best tasting herbal vaporizer on the market. Featuring 3 adjustable temperature settings and a coil infused ceramic heating chamber powered by a signature smart heat system.


A: The Lift will flash Red while charging and will turn Green when fully charged.
A: ~ 2 hours for a full charge.
A: No it cannot.
A: Press and hold the power button for a few seconds and let go, it will flash your battery level. (green through red)


A: 365 – 425°F
A: The Lift’s temperature can be adjusted by clicking the button 3x to turn it on, and watch the button cycle through the three colors representing the three temperatures. When your favorite temperature color shines, click once more to start up the heating process. If you’re in the middle of the session and want to change temperature, hold the power button and it will cycle through the temperatures. Let go when it’s at your desired color.

Blue – Low Temp
Yellow – Mid Temp
Green – High Temp


A: Prepare your materials in a medium/fine grind. Pack the oven full and semi tight (so there is still airflow).

Click the button 3x to turn it on, and watch the button cycle through the three colors representing the three temperatures. When your favorite temperature color shines, click once more to start up the heating process.

Take a steady draw and exhale.

A: You will want to stir every few draws to ensure the material is being heated evenly.


A: The mouthpiece is. As of now, we do not have any replacement parts on our site, you will need to contact FlytLab for any replacements.

Common Product Issues

A: Yes, the Lift will turn off after 2 minutes.

Cleaning & Maintenance

A: To clean the Lift make sure the device is powered off and wait until the oven has cooled. Use the cleaning brush included in the kit to remove any remaining material inside the heating chamber. If there is any residue build up. Use a wipe or alcohol swab to clean it off. It’s important to clean the Lift on a regular basis. For the best performance clean the heating chamber after every session.

Ordering / Returns / Warranty

A: The lift has a 10 year warranty! Please contact FlytLab with any warranty concerns.
Charging Options USB / AC Adapter
Replaceable Battery No
Recharge Time ~ 2 Hours
Heating Chamber Capacity ~ .3 – .4
Heating Chamber Material Ceramic
Warm-Up Time ~ 60 seconds
Heating Elements Stainless
Vapor Path Glass
Vapor Delivery Method Direct Draw
Method Convection
Warranty 10 Years

Included with Purchase:

  • Lift Vaporizer
  • Concentrate Tool
  • Cleaning Brush
  • USB Cable and AC Adapter
  • Flytlab Lift

    The Lift has an excellent finish available in Black & White.

    Getting the Most Out of Your Flytlab Lift

    • Always allow your Lift to fully preheat before use.
    • Do not load your blends too tightly in the stem, this will restrict airflow
      Lift does not flow freely through the vaporizer, many compare the experience to drinking a shake out of a straw. Don’t try to force it, learn what the Lift can provide, and adjust your draw accordingly.
    • Avoid completely depleting the battery before recharging.
    • Do not load your blends to lightly, they may fall out of the stem and make contact with the crucible; this will accelerate your next Lift Cleaning.
    • If you aren’t getting exactly the vapor quality you are after, look at adjusting any and/or all of the following variables until you find your sweet spot.
      Grind Consistency – are the ground-up particles all roughly the same size?

      Grind level – the Lift prefers a medium grind, but experiment with finer or coarser grinds to see if it achieves the result you are after.

      Amount Used – Some vaporizers thrive when loaded fully. Others, not so much.

      Draw Rate – Convection vaporizers with good airflow can have their temperatures altered by the speed at which you draw a breath. As the air passes over the heating element, obviously it heats up. If you draw fast, causing the air to move quickly over the heating element, it only has “X” amount of time to heat up. However if you draw slowly, the air has much more time to heat up, and therefore will deliver a much warmer air to your blends.

      Drawing fast = cooler temps;
      Drawing slow = warmer temps.

    • The draw on the Lift is not fast. Slow down your own draw until you match that of the Lift, this will increase your enjoyment immensely. Slow and steady is the key to Lift success.

    Need Assistance with your Flytlab Lift?

    Try these Solutions to common issues:

    A: If you feel like you are getting way too much material coming through the mouthpiece holes then first you want to try not pulling as hard. If you still are getting material in your mouth, try grinding your materials a little coarser.
    A: If your FlytLab Lift is not heating and it’s completely charged, please contact our Customer Care department for assistance.
    A: There are many variables at play here. The consistency of the grind of your aromatic blend, the amount of blend in the heating chamber, how evenly the chamber is loaded…A good baseline to start with is the Following:

    A consistent grind (all ground particles are of roughly the same size)

    A medium-level grind, as opposed to a fine grind. Think freshly cracked pepper, vs finely ground pepper. It is recommended to break your blends up by hand. Most grinders will create too fine a grind for the Lift.

    A full heating chamber, but not loaded tightly. Don’t fill it past the brim, and then lightly tamp it down to be level.

    Vary your draw rate: it’s possible you are inhaling too hard or too fast. Slow down a bit, and see if the vapor qualities change.

    A full heating chamber, but not loaded tightly.

    Warranty Contact

    Flyt Labs

    FLYTLAB Warranty Policy
    FLYTLAB 10 Year Ltd. Warranty Information
    FLYTLAB, Inc. warrants FLYTLAB against defects in materials and workmanship under normal use for a period of ten (10) years from the date of retail purchase by the original end-user purchaser. If a physical defect arises and a claim is received within the Warranty Period, at its option and to the extent permitted by law, FLYTLAB will either (a.) Repair the product defect, (b.) Exchange the product with a one of the same model or provide a functionally equivalent product if that model is no longer available.
    The Limited Warranty does not apply to normal performance degradation of batteries, Water Chamber, Air Chamber, Cartridges pieces or neglecting to adhere to cleaning instructions. FLYTLAB Warranty is only serviceable in the US & Canada, as FLYTLAB is only available for purchase in the US & Canada at this time.

    Exclusions and Limitations
    The Limited Warranty applies only to products manufactured by FLYTLAB, Inc. that can be identified by the “FLYTLAB” trademark, trade name, or logo affixed to them and purchased at an authorized retailer, serviced by an authorized FLYTLAB distributor.
    The Limited Warranty does not apply to any non-FLYTLAB products.
    This warranty does not apply to (a) damage caused by accident, abuse, misuse, natural disasters, acts of robbery, or other external causes; (b) to damage caused by operating the product outside the permitted or intended use as described by FLYTLAB; (c) to a product or part that has been modified to alter functionality or capability; (d) to cosmetic damage, including but not limited to scratches, dents, and broken plastic.
    Important: Warranty applies to original end-user purchaser only and is non-transferable. Warranty does not apply should you purchase through a 3rd party reseller such as eBay Amazon or Craigslist. FLYTLAB warranties only apply to devices purchased at any authorized retailer serviced by an authorized FLYTLAB distributor. For questions regarding authorized retailers, please contact us via email at support. *Intentionally opening up or disassembling your device in any way will void your warranty.

    Return Policy
    Please carefully research the product you are interested in prior to purchasing. Refunds are only available for new and unused devices purchased on If the box is opened a refund cannot be given. Refunds for devices purchased through an authorized FLYTLAB retailer, must be processed at the place of purchase.

    Claims process
    To obtain remedies under this Warranty, FLYTLAB must receive Consumer’s claim before the end of the Warranty Period. Consumer must obtain a Return Material Authorization (“RMA”) from FLYTLAB and return the defective Device together with proof of purchase to the address specified by FLYTLAB in connection with the RMA. Consumer shall bear the cost of shipping the Device to FLYTLAB. By sending the Device, Consumer agrees to transfer ownership to FLYTLAB for the purpose of repairing or replacing the unit. FLYTLAB may not return the original Device to Consumer. FLYTLAB warrants that any repaired or replaced Device is covered for the remainder of the original Warranty Period. If the claim is justified based on this Warranty, FLYTLAB shall bear the cost of shipping the repaired or replacement Device to the Consumer. Any product returned to FLYTLAB without a valid warranty claim or without a RMA may be rejected, returned at sender’s cost (subject to prepayment) or disposed of at FLYTLAB’s sole discretion.

    Leave a Reply