Flytlab Fuse – Vape Vitals
Manufacturer Flytlab
Style Portable
Charging Time ~ 2 Hours
Warranty 10 Years
MSRP $149.99

Brief Overview

The FlytLab Fuse is the worlds first eHookah that lets you ‘fuse’ refillable cartomizers along with dry herb or concentrate cartridges. For those looking for the ultimate is flavor combinations, there simply is nothing like the Flytlab fuse.


A: It will take about 2 hours.
A: About 6-8 hours since it’s inhale activated, it will only draw power upon inhale, otherwise the device is in standby mode.
A: The light will be red.
A: The light will turn green.
A: The light will be white.
A: Load the concentrate onto the coil in the center of the cartridge.
A: Loosely load your finely ground dry material into the heating chamber.
A: Use the provided liquid bottle for loading. Do not load the e-liquid inside the center hole. Shake slightly after load to make sure the wicks have fully absorbed the liquid.


A: There is no temperature settings with the Fuse. When you take a draw it begins to heat up the element.


A: Once fully charged, fill your desired cartridges, insert into the device, rotating clockwise. There is NO power button, so once loaded, simply inhale from the mouthpiece and the white FLYTLAB logo will light from the bottom of the device.
A: The FUSE is the only device that allows you to “fuse” your dry material, concentrate, and e-juice cartridges – allowing you to vape two materials at once. Be sure you are using the correct cartridge for your desired materials.
A: It will hold about .1 grams of dry materials.


A: The cartridges will need to be changed out every 4-6 weeks varying with use.

Common Product Issues

A: If the cartridge is screwed on too tight the cartridge may not receive the proper connection needed to function and will not vape. In the case of a bad connection loosen the cartridge and retry vaping.
A: Yes, there it will shut off after 3 minutes.

Cleaning & Maintenance

A: You can clean the dry cartridge with the brush given.To clean concentrates from inside the cartridge, you can do so using a loading tool or pick. USE CAUTION and be extremely careful not to damage the atomizer coil. The Liquid cartridge can be soaked in isopropyl rubbing alcohol and then rinsed clean and air dried.You can clean the mouthpiece with a q tip and isopropyl rubbing alcohol, as well as rinsing it in warm water.

Ordering / Returns / Warranty

A: 10 Year.
A: Flytlab handles the warranty, you will need to reach out to them.
Product Dimensions 1.77″ L x 1.77″ W x 11″ H
Charging Options Micro USB
Battery Type Li-Ion 18650 Battery
Replaceable Battery No
Recharge Time ~ 2 Hours
Tank Capacity .1 Grams
Tank Material Ceramic
Warm-Up Time ~ 5 Seconds
Vapor Path Plastic
Vapor Delivery Method Direct Draw
Method Convection
Warranty 10 Years

Included with Purchase:

  • Rechageable Fuse Ehookah
  • 4x Eliquid Refillable Liquid Cartridge
  • Flytlab Dry Herb Cartridge
  • Flytlab Concentrate Cartridge
  • Flytlab Power Plug
  • Flytlab Mini Usb Wire
  • Flytlab Liquid Bottle
  • Flytlab Tool Set
  • Fuse Instruction Manual
  • Flytlab Sticker

Flytlab Fuse

The Fuse has an excellent finish available in Black.

Getting the Most Out of Your Flytlab Fuse

  • The bubbling sound can be turned on/off with 3 short quick puffs. The bottom LED will blink once the sound has been activated.
  • Gently screw in your desired FUSE cartridges into the FUSE chamber until slightly tight.

Need Assistance with your Flytlab Fuse?

Try these Solutions to common issues:

A: If the cartridge is screwed on too tight the cartridge may not receive the proper connection needed to function and will not vape. In the case of a bad connection loosen the cartridge and retry vaping. If it continues, please reach out to customer service.
A: It may mean that your cartridge has run its course and it is time to replace it. If replacing your cartridge still does not work please contact Flytlab.
A: Take 3 shorts puffs and the LED on the bottom will flash 3 times notifying you it turned on or off.

Warranty Contact

Flyt Labs

FLYTLAB Warranty Policy

FLYTLAB 10 Year Ltd. Warranty Information
FLYTLAB, Inc. warrants FLYTLAB against defects in materials and workmanship under normal use for a period of ten (10) years from the date of retail purchase by the original end-user purchaser. If a physical defect arises and a claim is received within the Warranty Period, at its option and to the extent permitted by law, FLYTLAB will either (a.) Repair the product defect, (b.) Exchange the product with a one of the same model or provide a functionally equivalent product if that model is no longer available.
The Limited Warranty does not apply to normal performance degradation of batteries, Water Chamber, Air Chamber, Cartridges pieces or neglecting to adhere to cleaning instructions. FLYTLAB Warranty is only serviceable in the US & Canada, as FLYTLAB is only available for purchase in the US & Canada at this time.

Exclusions and Limitations

The Limited Warranty applies only to products manufactured by FLYTLAB, Inc. that can be identified by the “FLYTLAB” trademark, trade name, or logo affixed to them and purchased at an authorized retailer, serviced by an authorized FLYTLAB distributor.
The Limited Warranty does not apply to any non-FLYTLAB products.
This warranty does not apply to (a) damage caused by accident, abuse, misuse, natural disasters, acts of robbery, or other external causes; (b) to damage caused by operating the product outside the permitted or intended use as described by FLYTLAB; (c) to a product or part that has been modified to alter functionality or capability; (d) to cosmetic damage, including but not limited to scratches, dents, and broken plastic.
Important: Warranty applies to original end-user purchaser only and is non-transferable. Warranty does not apply should you purchase through a 3rd party reseller such as eBay Amazon or Craigslist. FLYTLAB warranties only apply to devices purchased at any authorized retailer serviced by an authorized FLYTLAB distributor. For questions regarding authorized retailers, please contact us via email at support. *Intentionally opening up or disassembling your device in any way will void your warranty.

Return Policy

Please carefully research the product you are interested in prior to purchasing. Refunds are only available for new and unused devices purchased on If the box is opened a refund cannot be given. Refunds for devices purchased through an authorized FLYTLAB retailer, must be processed at the place of purchase.

Claims process:

To obtain remedies under this Warranty, FLYTLAB must receive Consumer’s claim before the end of the Warranty Period. Consumer must obtain a Return Material Authorization (“RMA”) from FLYTLAB and return the defective Device together with proof of purchase to the address specified by FLYTLAB in connection with the RMA. Consumer shall bear the cost of shipping the Device to FLYTLAB. By sending the Device, Consumer agrees to transfer ownership to FLYTLAB for the purpose of repairing or replacing the unit. FLYTLAB may not return the original Device to Consumer. FLYTLAB warrants that any repaired or replaced Device is covered for the remainder of the original Warranty Period. If the claim is justified based on this Warranty, FLYTLAB shall bear the cost of shipping the repaired or replacement Device to the Consumer. Any product returned to FLYTLAB without a valid warranty claim or without a RMA may be rejected, returned at sender’s cost (subject to prepayment) or disposed of at FLYTLAB’s sole discretion.

Leave a Reply