Atmos Bullet-2-Go Product Page Link

 Atmos Bullet-2-Go – Vape Vitals
Manufacturer Atmos
Tank Style Concentrates
Method Direct Draw
Threading 510
Battery Li-Ion 350mAh
Warranty 5 Year
Replacement Coils Coming Soon
MSRP 39.95


Brief Overview

The Bullet-2-Go by Atmos is one of the smallest portable vaporizers available. Featuring a wickless ceramic heater, the Bullet-2-Go offers instant flavorful vapor at the push of a button, making it an ideal choice for portable solid concentrate or aromatic blend use on-the-go.

See User Guides below for full usage information.

Using Your Bullet-2-Go

A: We definitely recommend reading the full instructions located on the ‘User Guide’ tab, but here is a quick rundown on Bullet-2-Go Usage:

Charge the Bullet-2-Go – This could take a few hours the first time, but subsequent charges should not take longer than 46-60 minutes.

Load the Bullet-2-Go – This is easily done by removing the mouthpiece, and applying your solid concentrates on top of the atomizer coil, or insert a glass screen and load your aromatic blends on top. Do not load too much, more than a sessions worth is definitely too much. Replace mouthpiece.

Power up and Draw – If the switch on the Bullet-2-Go is locked, unlock by pressing the button 3 times. This enables the power switch and the Bullet-2-Go is ready to use. Press the button to begin vaporization. Use until you have had your fill, or the ten-second shut off turns the atomizer off.

A: 1 Second
A: When using solid concentrates, its vital that you only use that which melts cleanly and leaves no particulate behind. This particulate can overheat when in contact with the atomizer coil, shortening its lifespan.

A: The Bullet-2-Go was designed mainly for aromatic blends and solid concentrates. Avoid using liquids that do not solidify at room temperatures.
A: The AC adapter for the USB charging cable is rated from 100v to 240v, however you may need an outlet adapter for locations outside of North America.

USB Charging is also available.

A: When using solid concentrates its vital that you only use that which melts cleanly and leaves no particulate behind. This particulate can turn into carbon when in contact with the atomizer coil, shortening its lifespan.

Varying your draw rate slightly will allow you to adjust the density of the vapor output, slower draws will create thicker vapors, and quicker draws will create slightly thinner vapors.

The air intake on the Bullet-2-Go is controlled, so there is only a small amount of adjustment you can make to your draw rate.

A: The atomizer coil is NiChrome, the crucible is ceramic, and the mouthpiece is plastic.
A: Nichrome. Nichrome is a non-magnetic alloy of nickel, chromium, and often iron, usually used as a resistance wire in applications from atomizer coils to toasters and beyond.
A: With solid concentrates, we don’t recommend loading more than one sessions worth.

With aromatic blends, you can load as much as you can fit in the chamber, as long as you don’t load it too tightly.

A: Inspect your blends as you use the Bullet-2-Go, the color will dictate the need for stirring.

If, after the first few times you stir your blends, you find that the blend seems to be browning evenly, you are loading it properly, and may not need to stir.

If you are finding that your blend is browning unevenly, trying loading it *slightly* more loosely.

A: Yes, after 10 seconds. As a general safety rule, do not leave the Bullet-2-Go unattended while powered on.
A: The atomizer coil is not rebuildable, so when it eventually expires, replace with a new one.

Atomizers will last 4-5 weeks with normal use, your experience may vary.

A: There are no screens in the Bullet-2-Go.
A: Li-Ion, 390mAh with 510 threading.
A: The USB charging cable is rated from 100v to 240v, however you may need an outlet adapter for locations outside of North America.

Cleaning & Maintenance

A: Always allow the Bullet-2-Go to cool COMPLETELY before cleaning, 30 minutes should be sufficient.

Use the loading tool to clean inside the crucible, but be EXTREMELY careful not to make contact with the atomizer coil, it can be damaged very easily.

Any solid concentrate that has collected on the outside of the Bullet-2-Go can be cleaned with a warm, damp washcloth.

The mouthpiece and top section of the body that unscrews will incur the most buildup, especially with the use of solid concentrates. This can be cleaned by soaking in isopropyl alcohol.

Always make sure your vaporizer is COMPLETELY dry before plugging it back in to charge.

Do not attempt any internal or external repairs to your unit as doing so may cause fatal injury – or worse – void your warranty! (Please contact us if you feel something is wrong with your vaporizer.)

A: Inspect your Bullet-2-Go each time you use it. Make sure the coil is working perfectly, and that no debris or buildup is clogging the holes. Check the inside of the mouthpiece often, it will get dirty the fastest.

Atomizers will last 4-5 weeks with normal use. Replace as needed.

A: Only on the mouthpiece, and the top metal section that unscrews. Do not use liquids to clean the atomizer coil or battery.
A: The mouthpiece, and the top metal section that unscrews. Check these often
A: The atomizer is replaceable. Atomizers will last 4-5 weeks with normal use, however your experience will vary.

Ordering – Returns – Warranty

A: 30 Day
A: Not at this time.
A: VapeWorld is handling all Atmos warranty requests and service. If you have a warranty issue with your Atmos Bullet-2-Go, please contact us.
A: Your warranty begins on your purchase date, if you have any questions about your Bullet-2-Go warranty, please contact us.

If you have any other questions about the Bullet-2-Go vaporizer, please contact us!

Product Dimensions 4.69in x .375in x 0.375in (11.9cm x .95cm x .95cm)
Package Dimensions 5.5in x 2in x .85in (14.0cm x 5.10cm x 2.16cm)
Product Weight 0.03 lbs (0.01kg)
Package Weight 0.2lbs (0.09kg)
Heater Material Ceramic Crucible/Nichrome Coil
Tank Capacity One Session
Charging Options USB
Battery Type 510
Replaceable Battery Yes
Battery Capacity Li-Ion 350 mAh
Resistance TBD
Voltage TBD
Auto-Off? Yes, 10 Second
Safety Power Switch Yes, 3-Click
Heating Element NiChrome
Warm-Up Time 1 Seconds
Vapor Path Steel, Silicon
Country of Manufacture China
Warranty 5 Year

Included with Purchase:

  • Atmos Bullet-2-Go
  • USB Charger
  • User Manual

Bullet-2-Go User Guides

*Adobe Reader or PDF viewer Required

Getting the Most Out of Your Bullet-2-Go

  • Keep your Bullet-2-Go as clean as possible to ensure peak performance.
  • When using with aromatic blends, you will definitely want to use a glass screen, which keeps the blends from making contact with the atomizer coil. Contact with the coil will lead to instant overheating.
  • When using with solid concentrates, only load as much as one session will use. Overloading will effect performance.
  • Ensure safety lock is not engaged by clicking the power button three times. You should see the light on the button blinking, if not plug the battery in and fully charge it.
  • <\ul>


The top metal cap and mouthpiece will definitely need occasional soaking in isopropyl alcohol, inspect them often and keep them clean.

If any concentrate makes it on the outside of the Bullet-2-Go, it can be removed with a warm damp cloth.

Need Assistance with your Bullet-2-Go ?

Try these Solutions to common issues:

A: A few things could be causing this. Is the 3-click safety lock in place? Try clicking your Bullet-2-Go button three times and see if anything happens.

Are you getting any light at all from the button or the bottom? If not, make sure that its charged properly. This seems obvious, until you realize the power strip you were plugged into wasn’t turned on. Or…the USB port you were plugged into wasn’t actually a powered USB port. Or…there are many reasons to think your vaporizer is charging…when it isn’t. It happens all the time.

If you have charged it fully and unlocked the power button, and are still getting no vapors, remove the mouthpiece, press the button, and listen to see if there is any activity at all? if nothing happens, its possible your atomizer had expired.

Atomizers will last 4-5 weeks with normal use, however your experience may vary.

A: Make sure your Bullet-2-Go is fully charged, and the atomizer coil is screwed on fully and loaded properly (not overloaded). Check the connection between the battery and clearomizer for anything that could be blocking the connection.
A: The change in aroma will be your first indicator the atomizer has died.

If these troubleshooting tips don’t work, please contact us.

Atmos logo
Vape World carries atomizers and clearomizers that are compatible with the threading on the Bullet-2-Go .

Atmos Bullet-2-Go 5 Year Warranty

Vape World is handling all of the warranty requests and service for the Bullet-2-Go.


If you need more information about Bullet-2-Go ‘s Warranty, please contact us

Leave a Reply