Boost eRig – Vape Vitals
Manufacturer Dr. Dabber
Style Portable
Method Conduction
Charging Time 6-8 Hours
Warranty 1 Year
Country of Manufacture China
Warranty 1 Year
MSRP $149.95

Brief Overview

The Boost is a portable, battery powered vaporizer, employing a titanium, ceramic and quartz domeless nail much like you would see in a traditional glass setup. It uses a glass water filtration system to replicate the desktop concentrate experience perfectly. Just press the button to turn it on, wait 30 seconds for the light to turn blue or white depending on the temperature setting chosen, then load directly onto the titanium, ceramic nail, or quartz nails. Capable of 30 to 40 uses on a single battery charge, the Boost truly is the best of both worlds: a portable experience without any sacrifice.


A: The charger is USB and will work globally.
A: Due to the size of the battery, it is recommended to charge 6-8 hours or overnight on an AC adapter to charge fully.
A: Yes, but it does require a 25% charge before being able to use on the charger.
A: You will get 30 to 40 uses on a full charge.
A: The power button shows a purple light
A: The light will turn off when fully charged.


A: The Boost has 2 temperature modes. One for the titanium nail and one for the ceramic / quartz nails.

Titanium Nail: Press the power button 3 times to heat titanium nail. The unit will begin with white light and change to blue light after 25 seconds indicating it is ready to use (nail will continue heating for 20 seconds before cutoff)

  • Temperature reaches 515°F after 25 seconds
  • Temperature reaches 610°F after 45 seconds

Ceramic/Quartz Nail: Press the power button 5 times to heat ceramic/quartz nail. The unit will begin with blue light and change to white light after 40 seconds indicating it is ready to use (nail will continue heating for 20 seconds before cutoff)

  • Temperature reaches 520°F after 40 seconds
  • Temperature reaches 600°F after 60 seconds
A: Yes, turning it on will set the temperature depending on how many times you press the power button.


1. Load Water (Remove glass before loading)
2. Click button * 3 times for titanium nail * 5 times for ceramic /quartz nail
3. Load product on tip of tool.
4. Touch tip of the tool to nail once light changes color, then begin to inhale through glass mouthpiece.
5. Once all product has melted off of tool, flip tool around and place carb cap on top of the nail to increase vapor density. (Generally 3-4 seconds)
A: Fill it from the mouthpiece while detached from the Boost. It is designed to only hold as much water as it needs. As you fill it up, it will start to come out the bottom until it is at the correct level. Shake out any leftover water in the glass attachment.

*Never fill while attached, dry before putting on Boost

A: Load enough material onto you loading tool for a single use.
A: The Boost was designed for concentrates only.
A: Once all product has melted off of tool, flip tool around and place carb cap on top of the nail to increase vapor density. (Generally 3-4 seconds)


A: The nail easily screws off and on to swap it out. Twist it counterclockwise to remove it, and clockwise to put the new one on.
A: Yes there are. We offer a replacement for the attachment that was sent with the Boost. Dr. Dabber sells different versions of the attachment on their website.

Common Product Issues

A: Yes after the blue light turns on meaning it’s ready to use, the heater will turn off after 20 seconds.
A: The body of the unit may get warm, but the glass will be hot where it attaches to the Boost.

*Please use caution when removing the glass attachment!

Cleaning & Maintenance

A: To clean glass attachment, first remove the glass attachment from the eRig, then slowly pour 99% isopropyl alcohol into the mouthpiece until the unit is about 1/4 full. Shake the attachment gently until clean. To rinse out the alcohol, pour water into the top (mouthpiece) until all alcohol is flushed out of the bottom of the attachment. To remove all water from device, blow through mouthpiece and shake gently.
A: You will start to notice some build up on the nail, you can scrape it off once it starts to build up. You can also swap the nails out at this time.

Ordering / Return / Warranty

A: There is a 1 year warranty.
A: No it is not. If it is broken upon arrival please contact us to get it resolved.
Product Weight 1.34lb
Charging Options Micro USB
Battery Type 18650 3.7V Li-MN
Replaceable Battery Yes
Recharge Time 6-8 Hours
Battery Capacity 2500 mAh
Heating Element Ceramic
Warm-Up Time ~25 Seconds
Vapor Path Glass
Vapor Delivery Method Direct Draw

Included with Purchase:

  • Boost
  • Glass Water Attachment
  • 1x Domeless Titanium Nail
  • 1x Ceramic Nail
  • 1x Quartz Nail
  • 2x Silicone Storage Container
  • Magnetic Carb Cap
  • Magnetic Loading Tool
  • Micro USB Charging Cable
  • Limited Edition Keychain

Boost eRig Colors

The Boost eRig has an excellent finish available in Black.

Getting the Most Out of Your Boost eRig

  • To get the water out of the glass attachment, blow into the mouthpiece over the sink to avoid getting water everywhere.
  • Never leave the Boost in a hot car. Ever.
  • Only load enough concentrate on the loading tool for a single use, loading too much can get messy.
  • Keep the Boost in the magnetic stand to keep it from falling over.

Need Assistance with your Boost eRig?

Try these Solutions to common issues:

A: That indicates there is no charge left, it is time to charge your Boost!
A: This means the glass attachment is dirty and is in need of a cleaning! Refer to the “cleaning and maintenance” section on how to properly clean the Boost.
A: Try the ceramic nail and see if that has better results, also try the quartz nail with the correct heat cycle (5 clicks) to see if this gives you better results.

If these troubleshooting tips don’t work, please Contact us.

Warranty Contact

Dr. Dabber offers a 1-Year Warranty on the Boost.
Dr. Dabber is handling all warranty request and service for the the Boost:

All DrD, electronics (battery + charger) are automatically covered under a one-year Warranty.
If you are having trouble with either your Boost Battery or Boost Charger, please contact our Customer Care Department.
Please keep in mind, a warranty system is one that requires a copy of a receipt or proof of purchase. We are always happy to provide assistance, even to those without this documentation, but providing a receipt enables a Customer Service representative to help in a more efficient way.

Please Contact us. for a copy or your VapeWorld purchased Boost receipt.

Leave a Reply